Aircrete Bocks

Due to their thermal mass aircrete blocks have the ability to store and radiate heat back into a building.

This helps a house act as a storage heater, absorbing heat and radiating it back into the building when the temperature drops. This reduces any dips in temperature during the Winter and peaks in Summer, creating a comfortable environment.

The range of aircrete products,all with excellent thermal properties, means that blocks can be used for foundations, cavity walls, solid walls, party walls, flanking walls and beam-and-block floors that satisfy Building Regulations and energy efficiency requirements.

Aircrete blocks can easily achieve the sound insulation requirements of Building Regulations and have excellent sound insulation qualities, which allow their continued use throughout the building to achieve the requirements for internal walls and floors (only applicable in England and Wales) and separating walls and floors, including their associated flanking walls (applicable in England, Wales and Scotland).

Aircrete provides simple solutions when used for stacking and storage, contact us to ensure recommended mortar types are used for strength, laying blocks, cutting, chasing and fixing to block and applying internal and external finishes

Aircrete does not burn and can be used to contain or prevent the spread of fire within a building. Up to a 4 hour fire resistance can be achieved with a regular 100mm thick block making it the perfect choice for any building, but especially those where we live or care for less mobile persons.

Celcon Standard grade is extremely versatile and can be used below DPC as infill for Beam and Block flooring systems, as well as above the ground in the walling applications listed.Celcon Blocks Standard Grade are BBA certified and available in thicknesses from 75mm up to 215mm. Due to its all round performance, it is possible for a 100mm Standard grade Celcon Block to be used throughout a build – in all applications listed below, eliminating on-site confusion.Applications• Foundations • Internal and external leaf of cavity walls • Solid walls • Separating walls • Partitions • Multi storey buildings • Beam and Block floors • Flanking wallsTo determine the products and applications we have available click HEREand you will be re-directed to the relevant part of Celcons website. Celcon Solar Grade Blocks Celcon Blocks Solar Grade is principally used where enhanced thermal performance is required.With a superior thermal conductivity Solar Grade Blocks are suitably loadbearing for two storey buildings and can be used below DPC. H+H’s Solar Grade range is available in thicknesses from 100mm to 265mm, and are third party accredited for use in the applications listed.Applications:• Internal and external leaf of cavity walls • Solid walls • Partitions • Flanking wall • Below DPCTo determine the products and applications we have available click HERE  and you will be re-directed to the relevant part of Celcons website. Celcon Hi Strength Grade Blocks H+H’s Celcon Blocks Hi-Strength Grades are used principally where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.Available in compressive strengths of 7.3N/mm2 and 8.7N/mm2 they are available in thicknesses from 100mm to 215mm.Applications:• Internal and external leaf of cavity walls • Solid walls • Separating walls • Flanking Walls • Partitions • Multi storey buildings • FoundationsTo determine the products and applications we have available click HERE and you will be re-directed to the relevant part of Celcons website. Plus Blocks Celcon Plus Blocks are an alternative to the 440 x 215mm face format block and are suitable for the same applications.The Plus range is produced using the latest manufacturing technology which rank them amongst the most dimensionally accurate blocks available, making them ideal for use with H+H UK’s Thin-Joint System.Applications:• Internal and external leaf of cavity walls • Solid walls • Separating walls (not Solar) • Flanking and Partition Walls • Multi storey buildings • FoundationsTo determine the products and applications we have available click HEREand you will be re-directed to the relevant part of Celcons website. Multi-Plates H+H Multi Plates are a new generation of aircrete products that build on the efficiency of thin layer construction. At almost 2½ times the size of a traditional concrete block, Multi Plates and the Thin-Joint system will deliver significant savings in site productivity.Multi Plate benefits:• Increase build speed • Reduce wastage • High quality of build • All the benefits of aircrete products • All products under 20Kg (manually handled)To determine the products and applications we have available click HERE and you will be re-directed to the relevant part of Celcons website.