Shropshire Building Supplies can source felts and bitumens for any type of roofing in conjunction with Ruberoid.
FLAT ROOFS
Ruberoid is able to offer a complete range of flat roofing membranes, carefully developed to provide the optimum combination of performance and cost for every application.
Their market-leading range covers all product and application types including pour and roll, torch-on, mechanically fixed and complete self-adhesive membrane systems.
The traditional roofing felt range is a well established range of British Standard roofing membranes.
These roofing felts can be used as a single, two-layer or three-layer application, and are suitable for use as temporary waterproofing or for use on sheds or garden buildings.
The traditional products can be applied using conventional pour and roll techniques with hot bitumen or bonded cold-applied IKOpro Roofing Felt Adhesive. The range provides a cost effective roofing solution suitable for a wide range of projects, such as sheds, garages and garden buildings, they are however not recommended for use on habitable buildings.
Their range of underlay membranes forms an important part of the high performance roofing systems that we offer. Incorporating tough polyester or glass fibre reinforcement, with SBS and APP compatible options, and with a full suite of application types, including torch-on, pour and roll and self-adhesive, there is the ideal product for every flat roofing requirement.
Pour and roll application involves pouring hot bitumen onto the deck, insulation, or lower layer of membrane and rolling the next layer of membrane into it.
- Pour & Roll Membranes
- Torch-On Membranes
- Self-Adhesive Membranes
- Underlays
- Vapour Control Layers
- Glass Fibre Membranes
- Traditional Roofing Range
- Flashings
LIQUIDS & COMPOUNDS
Liquid applied waterproofing systems are ideal for use in a number of application areas, including roof repair and renovation, basement tanking and general structural waterproofing. Most liquids and compounds can be installed cold and are typically applied by brush, spray or roller.
Our IKOpro range of liquids and compounds offers a dedicated portfolio of roof repair products for merchants, distributors and general contractors. This offer has been developed to offer maximum performance and includes primers, adhesives, and a range of protective paints and repair coatings.
IKO Polimar systems suit both new build and refurbishment projects, are extremely versatile and are completely cold applied. They can also be specified to match the required longevity of your project through a range of build-up.
- Preparation of Substrate
- Adhesion
- Repair and Maintenance
- Finish and Protection
- Specialist Adhesives
- Damp Proof Membranes
HYLOAD ABOVE GROUND
| Building regulations drive the need for structural waterproofing materials within modern construction, and compliance with these regulations is a legal requirement.The Hyload above ground range encompasses a complete family of high performance, specialist damp proofing products to meet all building regulations, which also includes systems to prevent gas ingress and a range of insulated DPC and fire resistant cavity closures. |
HYLOAD BELOW GROUND
| When moisture is present within the ground some soil types do not provide particularly good drainage. As almost all buildings sit on foundations within the soil, there is a danger that this moisture will saturate the structure below ground level and cause damage to the building.Tanking a structure ensures that there is a complete and continuous sealed membrane across the floor slab area and which travels vertically up the external masonry, achieving a water protective envelope.Hyload Tanking is a range of waterproofing systems and ancillary products for use in cast concrete, brick and blockwork constructions, both internally and externally to protect buildings against water from the ground. The range includes Hyload tanking membranes, a selection of Protection boards and Synthaprufe Original, which is a cold-applied liquid damp proof membrane. These products combine to form waterproofing systems, often in conjunction with our high performance DPC products.Hyload’s Systems also benefit from the unrivalled support of the structural waterproofing industry’s leading design and technical services team, plus on-site technical support to ensure that you get more from the most acknowledged damp proofing systems in the country. |
PITCHED ROOFING
Ruberoid produces a wide range of products for use on pitched roofs; these include both underslating membranes, roofing shingles and bituminous roofing products.
Underslating Membranes are primarily to be installed below tiles, slates or metal roofing, providing a secondary barrier against wind driven rain, snow and dust.
Ruberoid is also a world leader in the manufacture of Roofing Shingles. They make the ideal roofing, attractive and easy to install and perfect for use on a range of buildings. Ruberoid also manufactures a Traditional Roofing Range of bituminous products for sheds and other non-habitable buildings. Click on any of the links below for more information on Ruberoids comprehensive pitched roofing materials.
